Wera Safe-Torque A 1 – Torque Wrench 1/4″ Square, 2-12Nm

Once the set torque value has been reached, the cannot be overtightened, so that applying too much torque is impossible. The setting range of 2 to 12 Nm is designed for controlled right-hand and left-hand tightening. The audible and tactile engagement when reaching the scale values additionally facilitates the safe setting of the desired torque value. In addition, the Wera Safe Torque A 1 offers the Torque Lock function for use as a standard ratchet without torque function. The return angle is only 5°, allowing the ratchet to be used in tight working situations such as turning angle applications.

Features of the Wera Safe-Torque A 1 – Torque wrench 1/4″ square, 2-12Nm

• Slip over release mechanism – therefore, the set torque value can never be exceeded
• Torque Lock function: the torque function can be switched off – tool can therefore also be used as a standard ratchet with high loosening torques and in defined rotation angle applications
• For controlled right and left tightening – tightening and loosening with and without torque
• Simple setting and securing of the desired torque value with audible and tactile engagement when the scale values are reached
• Only 30° disengagement angle after reaching target torque value
• Thanks to the fine toothing with 72 teeth, a low return angle of 5° is possible
• 1/4″ square drive with nut locking mechanism